Integrations — Xorth on Your Existing Systems

HOW IT WORKS

Camera to your systems, in one line

Xorth sits between the cameras you already own and the systems your teams already use.

Your cameras

Existing IP CCTV over RTSP through your NVR or VMS, or analogue via an encoder. No camera replacement and no new cabling.

Xorth vision engine

Twenty-four detection models run on your feeds — on-premise or in a private cloud you control. Only events, metadata and short clips leave the box.

Your systems

Every event flows into EHS, ERP, ticketing and BIM — each carrying the clip, camera, zone and confidence score.

Connected by an open REST API, an SDK and signed webhooks — so events land where your people already work.

FOUNDATION

Connectivity & cameras

Everything starts with the cameras you already own. Xorth subscribes to your existing streams over the network — it does not replace them.

Existing IP CCTV over RTSP
Connect through your NVR or VMS from any major brand — Hikvision, Dahua, CP Plus, Hanwha, Axis, Bosch — and any ONVIF-conformant camera.
Analogue estates too
Older analogue cameras connect through an encoder or a DVR with RTSP output, so a mixed estate runs on one platform.
Deploys where your policy allows
On-premise, private cloud you control, or Xorth-hosted — fixed in your order form.

INTEGRATION

EHS, ERP & ticketing

Every detection pushes into the systems your teams already open. Xorth is designed to be a source of events, not another dashboard nobody logs into.

EHS management systems
Observation counts, PPE compliance by zone and unclosed corrective actions flow in as structured events.
ERP & ticketing
A detection can raise a ticket carrying the clip, camera, zone and confidence score.
Access control & more
Events route into access-control platforms and the other tools your teams already run.

PARTNER

Aerial & drone survey

Aerial capture for progress mapping and zones that are unsafe to reach on foot — delivered by drone survey partners under their own DGCA authorisation, scoped per project. We coordinate it; we do not fly it.

Progress mapping from the air
Orthomosaics and aerial sequences for earthworks, stockpiles and whole-site progress fixed cameras cannot frame.
Hard-to-reach zones
Facades, roofs and live areas that are unsafe or impractical to inspect on foot.
Flown by partners
Delivered by partners flying DJI and Indian-built platforms under their own DGCA authorisation.

INTEGRATION

BIM & project systems

Overlay live site reality against your BIM model and project systems to catch deviations while they are still cheap to fix.

Reality vs. model
Compare what the cameras see against the plan, so a deviation surfaces in a review rather than a rework order.
Feeds your project tools
Detections and progress signals push into the project environment your PMO already runs on.
Scoped with your integrator
Deeper BIM connectors are scoped per project — Xorth is a source of events, not a rip-and-replace.

PARTNER

360° & reality capture

Timestamped 360° walkthroughs and point-cloud capture for the as-built record — delivered by a capture partner and scoped per project.

360° walkthroughs
Timestamped walkthroughs that let anyone revisit what a space looked like on a given date.
Point-cloud & as-built
Reality capture for the as-built record and for comparison against the design intent.
Delivered by partners
Provided by a reality-capture partner; Xorth coordinates and holds the record alongside your detection data.

NATIVE

Timelapse

The one on this list that is genuinely ours. Automated time-lapse generated from the site cameras you have already connected — no extra hardware, no separate contractor.

Built from your live feeds
Produced from the same camera streams Xorth already analyses — nothing new to install or schedule.
Progress you can share
Daily, weekly and project-length sequences for progress reviews, client updates and the as-built record.
Zero marginal cost
Because it rides on cameras you already stream to Xorth, timelapse is a setting, not a separate project.

YOUR STACK

Works with the stack you already run

Xorth is a source of events, not another silo — it pushes into the platforms you already operate.

Cameras & VMS

HikvisionDahuaCP PlusHanwhaAxisBoschMilestoneGenetecany ONVIF/RTSP

EHS management

EnablonCorityIntelexSafetyCulture

ERP

SAPOracleMicrosoft DynamicsTally

Project & BIM

AutodeskProcoreNavisworks

Ticketing & ITSM

ServiceNowJiraFreshservice

Access control

HoneywellLenelS2HID

Alert delivery

WhatsAppSMSEmailWebhook

Examples, not endorsements — Xorth connects through an open REST API, an SDK and signed webhooks; deeper, product-specific connectors are scoped per project with your systems integrator.

FAQ

Integration questions, answered

How does Xorth connect to our cameras?

Xorth subscribes to your existing IP CCTV over RTSP through your NVR or VMS, and to any ONVIF-conformant camera; analogue estates connect through an encoder or a DVR with RTSP output. There is no camera replacement and no new cabling.

Where is our video processed and stored?

On your terms — on-premise, in a private cloud tenancy you control, or Xorth-hosted, fixed in your order form. In on-premise and private-cloud modes footage never leaves your environment; only events, metadata and short evidence clips reach the dashboard, with a full audit trail. You remain the Data Fiduciary under the DPDP Act, 2023.

What counts as native, integration, or partner?

Native is timelapse — the one thing on this page that is genuinely ours, generated from cameras you already stream. Integration is BIM, EHS, ERP and ticketing, connected via our open API and webhooks. Partner is aerial/drone and 360° capture — we coordinate them, but they are flown or captured by survey partners under their own DGCA authorisation.

How do detections reach our systems?

Through an open REST API, an SDK and signed webhooks. Every event carries the clip, camera, zone and confidence score, so it can raise a ticket, update an EHS record or push into your ERP without anyone opening a second dashboard.

Is the integration two-way?

Mostly one-way — Xorth is designed to be a source of events. Where it helps, it is two-way: permit state from an electronic permit-to-work system can be pushed to Xorth by webhook, so a monitored zone follows the permit automatically.

Can you build a connector for our specific system?

Yes. The API, SDK and webhooks cover most needs out of the box; deeper, product-specific connectors are scoped per project with your systems integrator.